manualshive.com logo in svg

MTU 20 V 4000 C22, Руководство по эксплуатации

Поделиться
Скачать
MTU 20 V 4000 C22 Скачать руководство пользователя страница 85

7.8 Fuel System

7.8.1 Fuel system – Venting

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Diesel fuel

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid open flames, electrical sparks and ignition sources.

• Do not smoke.

Venting LP fuel system

1.

Loosen flushing/return line of HP pump at

connection (1).

2.

Unlock fuel priming pump (2), screw out

handle.

3.

Operate the fuel priming pump (2) with the

handle until bubble-free fuel comes out of

the connection (1).

4.

Lock fuel priming pump (2), screw in han‐

dle.

5.

Verify that fuel priming pump (2) is locked:

handle must be tightened.

6.

Tighten connection (1) of flushing/return

line.

M015675/05E 2011-10 | Task Description | 85

TIM-ID: 0000004707 - 002

Содержание 20 V 4000 C22












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды