MTU 20 V 4000 C22 Скачать руководство пользователя страница 10

Страница: 10 / 139

1.4 Crankshaft transport locking device – For transport with

flanged-on generator

Transport

This locking device protects the crankshaft bearings from shocks and vibration damage during unit trans‐

port.
For removal of the transport locking device follow the following instructions:

• The transport locking device should remain installed as long as possible during unit installation in or‐

der to avoid damage.

• Starting or barring the engine is allowed only with the transport locking device removed. Make sure

that the transport locking device of the generator is removed.

• Prior to every unit transport, this transport locking device must be reinstalled according to the instruc‐

tions. The transport locking device of the generator is also to be fitted.

Removing the transport locking device from driving end (KS)

• Remove screw (4) on both sides. Remove retainer (2) and washer (3).

• Remove guard plate from flywheel housing.
Store the removed parts of the transport locking device carefully for possible reuse!

10 | Safety | M015675/05E 2011-10

TIM-ID: 0000004012 - 001

Содержание 20 V 4000 C22












































































































































Результаты поиска

Содержание 20 V 4000 C22

Отзывы:

Бренды по названию

Популярные бренды

MTU 20 V 4000 C22, Руководство по эксплуатации

Результаты поиска

Содержание 20 V 4000 C22

Отзывы:

Бренды по названию

Популярные бренды