manualshive.com logo in svg

MTU 16V4000M73 series, Руководство по эксплуатации

Поделиться
Скачать
MTU 16V4000M73 series Скачать руководство пользователя страница 211

8.16.3 Automatic oil filter ‒ Removal

Preconditions

☑

Preparatory steps have been completed.

DANGER

Suspended load.
Danger to life!
• Use appropriate lifting devices and appliances.
• Never stand beneath a suspended load.

WARNING

Heavy part, risk of falling or overturning due to lack of stability.
Risk of crushing body or limbs!
• Use appropriate lifting gear and appliances.
• Wear safety shoes.

WARNING

Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.

WARNING

Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.

NOTICE

Ingress of contamination from automatic oil filter in the engine oil system.
Severe engine damage possible!
• Remove the automatic oil filter before changing the oil filter candles.
• Keep everything scrupulously clean when performing maintenance and repair work.
• Cover all exposed openings when opening assemblies.

NOTICE

Contaminated components.
Risk of damage to component!
• Check components for special cleanliness and clean if necessary.

MS150123/01E 2017-05

| Oil Filtration / Cooling | 211

TIM-ID: 0000014231 - 011

Содержание 16V4000M73 series











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды