5.5 Operational monitoring
DANGER
Rotating and moving engine parts.
Risk of crushing, danger of parts of the body being caught or pulled in!
• Only run the engine at low power. Keep away from the engine's danger zone.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
• Wear ear protectors.
Operational monitoring
Item
Measure
Control and display panels
Check readings of operational data (speed, temperature, pressures).
Engine under load,
engine at nominal speed
Check engine/plant and all pipework visually for leaks, rectify any leaks with
the engine stopped;
Check for abnormal running noises and vibration.
Fuel prefilter
Check reading on differential pressure gage to ensure that maximum admis-
sible value is not exceeded (→ Page 103).
Exhaust system
Check exhaust color (→ Page 67).
Intercooler
Check condensate drain(s) for water discharge and obstruction
(→ Page 111).
Air filter
Check signal ring position of service indicator (→ Page 114).
Replace air filter (→ Page 112), if the signal ring is completely visible in the
red area of the service indicator observation window.
Coolant pump
Check relief bore (→ Page 124).
Compressed-air system (if
installed)
Check operating pressure on pressure gauge;
Always fill compressed-air tank to max. pressure;
Drain condensate from compressed-air tank, pressure drop must not exceed
1 bar .
MS15018/03E 2016-02
| Operation | 37
TIM-ID: 0000010120 - 003
