1.5 Crankshaft transportation lock – For transport with flange-
mounted generator
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 10-60 Nm
F30452769
1
Ratchet
F30027340
1
Engine oil
Transportation lock
Note:
The transportation lock on the engine protects the crankshaft bearings from potential damage caused
by shocks and vibration when transporting the genset.
For installation and removal of the transportation lock, follow the instructions
below:
1.
The transportation lock must remain in place on the engine for as long as possible during installation of
the genset in order to prevent damage.
2.
The engine must never be started or cranked with the transportation lock in place. Make sure that the
transportation lock on the generator is also removed.
3.
The transportation lock must always be refitted on the engine according to the instructions whenever
the genset is transported. The generator transportation lock should also be installed.
Removing transportation lock on
driving end (KS)
1.
Unscrew screw (4) on both sides of the fly-
wheel housing (5).
2.
Remove retainer (2) and washer (3).
3.
Remove guard plate from flywheel housing.
4.
Store the removed parts safely so that they
are ready for reuse when required.
Installing the transportation lock on driving end (KS)
Note:
Keep guard plate and screws on the engine. They must be refitted when the transportation lock has
been removed.
1.
Remove guard plate from flywheel housing.
2.
Install barring device (→ Page 78).
10 | Safety | M015695/03E 2013-03
TIM-ID: 0000040647 - 002
