V-0-02-EN
Impala User manual
Operation
20
Operation
21
Set alarm limits
To set alarm limits, touch the ‘Alarm’ button on the Setting screen. Select desired
alarm limit and adjust its value. Touch OK to return to the Setting screen.
Setting screen
Setting screen allows some features of the device to be configured. To enter
Setting screen, touch Setting button on the main screen. To return the main screen,
touch the Setting screen again.
Following features are available on the Setting screen:
• Go to the Device information screen
•
Calibrate oxygen sensor and flow sensor
• Set alarm limits
• Check system tightness
• Adjust less frequenly used parameters
• Adjust alarm sound loudness
The Setting screen and available features may vary depending on the soft-
ware version.
Turn the device off
Press and hold the Power button to turn the device off.
Start/Stop ventilation
After selecting ventilation mode and all neccessary parameters are set, ventila-
tion can be started by touching Standby button. Touching Standby during ventilation
will put the device in Standby mode and stop ventilation. A timer in the standby but-
ton starts counting up to show how long the patient has not been ventilated.
Red color of the standby button indicates that the device is in Standby mode.
Refer to Ventilator Parameter section for available parameters in each venti-
lation mode.