Installing the 493.10 Chassis (FTGT)
MTS 793 Controller Hardware
Installation
47
Rear Panel Transition Panels
M
ODEL
M
ODULE
N
AME
F
UNCTION
493.71
RS485
Provides four channels of RS-485 interface, four channels of
station stop interlocks, and four channels of emergency stop
interlocks. The RS-485 interface channels are used for the
Remote Station Controller and/or temperature controller.
493.72
Digital I/O
Contains sixteen general purpose digital input channels and
sixteen general purpose digital output channels.
493.73
HPU Transition Board
Interfaces the controller with a hydraulic power unit.
493.74
HSM Transition Board
Interfaces the controller with a hydraulic service manifold and
other devices, up to two stations.
493.75
Analog In BNC
Provides six BNC channels for analog input signals. The input
signals must be within ±10 V DC.
493.76
Analog Out BNC
Provides six BNC channels for analog output signals. The
output signals are within ±10 V DC.
493.77
Filtered Analog Input
Provides filtering for the Model 493.45 A/D (analog-to-digital)
modules.
493.78 Accelerometer
Transition
Board
Interfaces with up to three low impedance voltage mode
(LIVM) accelerometers and three signal conditioned type
accelerometers.
493.79
Multiple Universal Driver
Board
Provides up to six drivers that can be used to drive standard
252 servovalves. Inputs to this board can originate from
either a ADDA II board (6 outputs) or a Model 493.46
D/A board (6 outputs).
493.80
Encoder Transition
Interfaces with up to four encoders.
493.81
Analog In BNC
Provides up to eight channels of analog input to each Model
493.55 A/D module. The input signals must be within ±10 V
DC.
493.82
Analog Out BNC
Provides eight channels of analog output from the Model
493.56 D/A modules. The output signals are within ±10 V DC.
493.83
Filtered Analog Input
Provides up to eight channels of filtered analog input to each
Model 493.55 A/D module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
