TempoLink Smart Assistant
Operation Manual
I
7
I
NOTICE
If you are using a mobile device, ensure cellular data is off.
Depending on your operation system, message can appear,
that there is no internet access. TempoLink smart assistant
does not need internet access.
Connecting to the user interface may take longer if Wi-Fi
and LAN connections are active.
7. Connection of TempoLink smart assistant to
smartphone, tablet or computer
Connect to a smartphone, tablet or computer to display the
graphical user interface of the TempoLink smart assistant.
7.1 Connecting a Wi-Fi enabled device to the
integrated Wi-Fi access point
3
Activate Wi-Fi on the device and choose the network
“TempoLink_xxxx” (xxxx indicates the last four digits of the
serial number). The default password is the serial number
printed on the label on the bottom of the TempoLink smart
assistant.
Fig. 6: Choose the network “TempoLink_xxxx” in the Wi-Fi
settings of the Wi-Fi-enabled device
7.2 Connecting a computer via USB connection
The TempoLink smart assistant can also be connected via
USB. If the computer is Wi-Fi enabled deactivate Wi-Fi on the
computer before setting up the USB connection.
Connect the USB cable with the micro USB connector to
the port labeled “USB” on the TempoLink smart assistant.
Next, connect the USB type-A connector to a free USB port of
the computer. The USB connection simulates a network card.
In the folder “network connections” on the computer the
connection is shown as “IP-over-USB” or “Remote NDIS”.
3/
The integrated Wi-Fi access point does not provide
internet access
After the connection via Wi-Fi or USB is established, open the
browser and go to the website-URL:
The connection icon in the top right shows the status of the
connection between the TempoLink smart assistant and the
sensor.
Fig. 8: Start page of the graphical user interface
Fig. 9: Connection status
Connection status
Green
Information
ON
Connection to sensor is established
Red
Information
ON
Connection to sensor is not established
Blue
Information
ON
Sensor in command mode
NOTICE
Only one device can be connected to the TempoLink smart
assistant at a time in order to display the graphical user
interface.
NOTICE
Disable all Wi-Fi and LAN connections before connecting
TempoLink smart assistant via USB. Connecting to the user
interface may take longer if Wi-Fi and LAN connections
are active. It may be useful to press CTRL + F5 to delete
cached text and images from prior to launching the
tempolink.local
website.
USB connector
Fig. 7: USB port on the TempoLink smart assistant
8. Establishing a connection via browser
