MTP MTP-1032, Инструкция по эксплуатации

Страница: 10 / 14

7. Battery replacement
WARNING
Remove the probes from any testing point when opening the battery case
Batteries are dead when power LED flashes or goes off at self-diagnostic test defined in
section 4.1. Follow the procedure below and replace batteries with new ones (type IEC
LR03 1.5V).
 Unlock the battery case with a coin-shaped object.
 Pull out the battery case and replace the batteries. Insert new batteries according to
the engraving on the battery case.
 Insert the battery case into the instrument and firmly lock the case again.
WARNING
Confirm that the battery case is properly locked prior to measurements.
8
www. .com
information@itm.com 1.800.561.8187