MTN PREMIER CLIMAX LOGGING STEAM ENGINE, Руководство по эксплуатации

Страница: 19 / 24

19
Premier Climax Logger Steam Engine
LYS Remedy
Once in LYS, the engine doesn’t go
into reverse.
When the LYS enters its last
sequence the bell automatically
comes on.
When LYS is enabled, pressing the
whistle and bell buttons has no effect.
I push the direction button but the next
sound clip in the sequence does not
play or the engine does not come out
of LYS after fourth press of the
direction button.
So that LYS effects can be as realistic
as possible,
Proto-Sound 2.0
disables the reversing unit
whenever LYS is enabled. This
way the engine remains still at its
stop as the operator cycles
through the LYS sequences.
LYS is programmed to start ringing
the bell at that point. After
approximately 12 rings of the bell,
it will automatically turn off.
Because LYS must control various
effects in each sequence, Proto-
Sound 2.0 takes control of these
sound effects until you exit LYS.
Each LYS clip must play for approx.
30 seconds before LYS will advance
to the next step in the LYS cycle. Wait
at least 30 seconds in each LYS
sound clip before pressing the
direction button.
Compatibility
This engine will operate on any traditional O-31 or larger O Gauge track
system, including M.T.H.’s RealTrax
®
or ScaleTrax
™
or traditional tubular
track. It is also compatible with most standard AC transformers. (See page 19
for a complete list of compatible transformers and wiring instructions.)