R e l i a b l y S e r v i n g a T h i r s t y W o r l d
®
1770 Brackett St., La Verne CA 91750 USA
•
T:
909-629-7301
•
F:
909-629-7380
•
www.mtnproducts.com
•
POU Install
Determining Auto SIP Set Time
•
On a operating unit, press the Auto Clean button once and release (less than
3
seconds). There will be a one second delay and the system will beep (Y) times.
If Y=
6
check current time. Example current time is
6
PM +
6
beeps indicates
the system will start at
12
AM
•
If cooler looses power it will retain the Auto Start time setting.
•
To reset to factory default, press and hold “Hot”, “Water”, and “Cold” buttons
simultaneously and wait for tone (about 3 seconds.) You will then hear
1
long
beep indicating SIP
®
has been reset to factory default settings. Factory default is
sets SIP
®
to off.
®