5
QSG 800LR-1.8
May 2010
4
Antenna installation
The antenna must be be installed above all local obstructions
5
Resetting your unit to factory defaults
You must reset the receiver unit to factory defaults before linking the
transmitter and receiver units.
To reset the default factory configuration:
1. Press and hold the RSSI push button.
2. Power on the WIO-800LR receiver.
3. The WIO-800LR receiver flashes all LEDs at medium flash (i.e. 1.6 Hz).
NOTE
: If the LEDs do not flash, you must repeat steps 1 and 2 until the LEDs
flash before continuing.
4. Release the RSSI push button within 5 seconds.
5. Within a further 60 seconds, press and hold the RSSI push button for 5
seconds (until the LEDs stop flashing) and then release.
6. The WIO-800LR receiver lights all LEDs for 2 seconds before returning to
normal operation.
NOTE
: If the LEDs do not light, you must repeat the process from step 1 until
the LEDs light before continuing.
7. You can now link the transmitter and receiver units.
