Figure 2: IR-1000 Control Rear Panel
Power
Connect the external switching supply to the rear panel's
POWER
connector and to a suitable power source in the
range of 95VAC to 250VAC.
Ensure that an approved AC
cord is used to attach the supply to the AC mains.
Camera
This 12-pin
‘
Hirose
’
connector supplies all of the power
and interface to the
IR-1000
camera head. Always ensure that
the camera head is attached to the control unit before turning
the control unit on.
NOTE:
The interconnect cable between the camera head and
the control unit has different sex connectors. The control
unit end has a yellow stripe labeled “CCU”. Be certain to
use the correct cable end at the control unit and head in
order to avoid damage, which could void the warrantee.
