Lights
F0 – Headlight/Taillight
This toggles your headlight/taillight on and off.
F5 – Lights
This toggles your firebox and cab interior light on and off.
Master Volume
F6 – Master Volume
There are 10 volume levels. Pressing F6 twice (toggling on then off) raises the Master
Volume one level. The Master Volume loops. That is, if you go past the 10th level it will
loop back around to the 1st or lowest volume level.
Forward/Reverse Signal
Just like a real engine, you can announce the direction of intended movement using
your DCC handheld and F9 and F10.
F9 – Forward Signal
Pressing F9 twice (toggling on then off) will sound the Forward Signal. This is two
whistle/horn blasts.
F10 – Reverse Signal
Pressing F10 twice (toggling on then off) will sound the Reverse Signal. This is three
whistle/horn blasts.
Engine Sounds
F25 – Engine Sounds
You can turn the Engine Sounds On/Off by pressing the F25 button. Pressing it once
(enabling F25) will cause the Engine Sounds to shut off. The Whistle/Horn and Bell
sounds will still be active, however. To turn the engine sounds back on press the F25
button again (disable F25).
RailKing PCC Electric Street Car w/ Proto-Sound® 3.0
15
