background image

Digital Control

In standard analog DC mode, your model still operates under digital control.  The 
PS 3 advance speed control system converts track voltage into digital speed 
commands.  Your model will run smoothly and consistently at any speed regardless 
of  load, hills, or curves.  If you are a DCC user, you'll quickly learn to appreciate the 
precision of  our speed control and linear speed curve.  DCS users will enjoy the 
added benefits of  controlling speeds in increments of  1 scale mile per hour 
displayed on DCS controllers or easily changing acceleration and deceleration rates 
independently without any discussion of  bits or bytes. 

To be clear, DCS is NOT 

DCC.

Lights & Smoke

As you read on, you'll notice there are no instructions for replacing light bulbs in 
your  Mohawk.  That's because there aren't any.  We use specially designed and 
controlled LEDs to create realistic lighting effects that occur automatically.  Again, 
NO PROGRAMMING!!  Just come to a stop and watch as the headlight dims 
automatically in accordance with rule 17.  Of  course, as you pull away, the headlight 
returns to it's fully bright, yet warm, glow.   We even included a light in the cab so 
the engineer and fireman can see to do their jobs!

M.T.H. is renowned for our realistic smoke systems.  This HO Steam Engine is no 
exception.  When the smoke is on, you will experience copious puffs synchronized 
precisely with chuffing sounds at 4 times per revolution of the drive wheels.  Of  
course, when you stop, the smoke wafts out of  the stack steadily, just like the real 
thing!  The smoke behavior applies to all operating modes, analog DC, DCC, or 
DCS.  With some DCC controllers, you can turn smoke on and off remotely.  In 
DCS mode, you can not only toggle smoke on and off  with the press of  single 
button, you can actually select from 3 output levels to keep those smoke alarms 
from going off !

More…

 In analog DC operation, just flip the track polarity or direction switch at any speed 
and watch your Engine gradually come to stop, turn on the appropriate directional 
lighting, and smoothly accelerate back up to speed.  No other HO locomotive has 
features like these.  There are so many more things to learn and enjoy about M.T.H.  
HO Engines, we could write a book.  But, that's no fun.  So, if you haven't already 
done so, flip to the Quick Start Guide and let's run your new engine!!

M.T.H. HO 4-6-4 Empire State Express Steam Engine

6

Содержание HO 4-6-4

































Отзывы: