9
•
Lift the rear discharge door.
•
Place the hooks of the grass catcher into the slots
in the handle bracket assemblies on both sides.
See Figure 9. Release the rear discharge door.
Figure 9
Removing Grass Catcher
•
Lift the rear discharge door on the mower.
•
Lift the grass catcher up, out of the slots in the
handle bracket assemblies.
•
Reinstall the plastic rear mulching baffle.
•
Release the rear discharge door.
WARNING:
Never operate the mower
unless the hooks on the grass catcher are
seated in the slots on the handle bracket
assemblies, and the rear discharge door
rests firmly against the top of the grass
catcher.
Chute Deflector
(If equipped)
If your mower is equipped with the chute deflector,
assemble as follows:
Figure 10
•
Slide the rod into the upper edge of the chute
deflector so the tab on the rod is toward the left side
of the chute deflector. When assembled correctly,
the rod will extend further to the left side than the
right side. See Figure 10.
•
Slide the push nut onto the right side of the rod to
secure.
Attaching Chute Deflector
•
Lift the rear discharge door on the mower.
•
Place the ends of the rod into the slots in the handle
bracket assemblies. See Figure 11.
•
Release the rear discharge door.
Figure 11
Converting to Mulcher
•
Lift the rear discharge door.
•
Remove the grass bag or chute deflector.
•
Insert the mulch plug. See Figure 8.
•
Release the rear discharge door. See Figure 9.
Rear Discharge Door
Tab
Rod
Chute
Deflector
Push
Nut
Rear
Discharge
Door
Slots in
Handle Bracket
Assemblies
Содержание Yard-Man 12A-449T402
Страница 19: ...19 NOTES...
