25
Troubleshooting
If you have any further questions, please contact your authorised dealer on site.
All information, diagrams and specifications in these operating instructions are based on the latest product information
at the time of going to press. We reserve the right to make changes without prior notice.
Engine has no power or stops during cutting
Cause
Procedure
Cutting head entangled with grass
Stop the engine and clean the cutting attachment.
Dirty air filter
Clean or replace air filter.
Old or incorrectly mixed fuel
Empty the tank/fill with fresh fuel mixture.
Carburettor incorrectly adjusted
Have carburettor adjusted by customer service personnel.
Cutting head does release line
Cause
Procedure
Cutting head entangled with grass
Stop the engine and clean the cutting attachment.
No line in the cutting head
Wind up new line.
Coil jammed
Replace coil.
Cutting head dirty
Clean coil and coil housing.
Line fused together
Pull apart, take out the fused part and wind up the line
again.
Line twisted when wound up
Pull apart and wind up the line again.
Not enough line released
Tap the bump head and pull out the line until 10 cm of line
is outside the cutting attachment.
