MTD Cub Cadet LH5 B60, Руководство по эксплуатации

Страница: 18 / 119

18
Intended use
EN
¾
The device must not be used for purposes
other than those intended because of the risk
of bodily injury to the user or other persons .
¾
Only use the leaf blower in daylight or under
bright artificial light. Keep your work area clean
and well lit.
¾
Only use the leaf blower in dry weather con-
ditions .
Keep it away from rain or damp. The
ingress of water into the leaf blower increases the
risk of an electric shock.
¾
Do not touch any dangerous moving parts
before the moving parts have come to a stand-
still and the power pack has been removed .
¾
Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage . Always bear this
in mind.
¾
Do not use the device if it is raining or there is
a risk of storms .
¾
Replace all worn or damaged information
signs on the device .
¾
Only use power packs and chargers approved
by the manufacturer . The designations of the
approved power packs/chargers are listed in
the enclosed CE Declaration of Conformity .
Safety information
Intended use
The leaf blower is intended solely for the blowing
together of leaves and mowed cuttings in private
households.
Any other use is classed as an unintended use.
The user is liable for any damage arising from unin-
tended use.
Incorrect/abnormal use
This leaf blower is not intended for use in public
areas, parks, sports grounds, roads etc., nor in agri-
culture or forestry.
Identification plate
F
The identification plate is located on the device
casing.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Structure
1 Manufacturer
2 Year of manufacture
3 Device group
4 Model name
5 Rated voltage, current type
6 Current strength
7 Protection class
8 Disposal instruction
9 CE label
10 Guaranteed sound level
11 Model number
12 Serial number barcode
13 Serial number
Operating controls
Operating controls
A
A On/off switch with speed lock function
B Speed lock lever (speed control)
C Handle
D Power pack compartment
E Power pack release
F Upper blowing tube
G Lower blowing tube