MTD Cub Cadet 2000 Series, Руководство пользователя

Страница: 23 / 139

2ZQHUV*XLGHÒ&XE&DGHW6HULH (QJOLVK
Maintenance work and regularity
When Activity Execution To be done by
As necessary Check the paper insert
in the air filter Check more frequently in the event of
excessive dirt. Clean the paper insert
of the air filter and replace when
necessary (see handbook for engine). Operator/Service
Change the engine oil
and oil filter Check more frequently in the event of
excessive dirt. Change the engine oil
and the oil filter as required (see
handbook for the engine or consult a
specialist workshop). Operator/Service
After every 10 hours or
once monthly Check the level of
electrolyte in the battery
(only necessary for type
2 batteries)
Danger
Battery acid and battery acid fumes
can injure your skin and eyes. Take
due care when adding distilled water
and always wear goggles and
protective gloves.
Operator/Service
Add distilled water to the
battery as required.
Remove all grass and
chaff from the area of
the air filter, the radiator
grill and the side
covering. Remove the side covering and
remove grass and chaff (see
“Cleaning”). Operator
Check the air filter Clean or replace as required (see
handbook for engine). Operator/Service
Lubricate the bolt (1) on
the front axle on both
sides (see fold-out
page) Use 251 EP grease or similar multi-
purpose lithium grease, no. 2. Operator
Lubricate the steering
stub axle (2) on both
sides (see fold-out
page) Use 251 EP grease or similar multi-
purpose lithium grease, no. 2. Operator
Lubricate the pivot
points of the foot and
lever controls (3) (see
fold-out page) Use only high-quality lubrication oil to
do this. Apply the oil liberally to the
pivot points. Operator
Lubricate the shafts (6)
of the mower unit (see
fold-out page) Use 251 EP grease or similar multi-
purpose lithium grease, no. 2. Operator
Lubricate belt-
tensioning lever (7) of
the cutting mechanism
(see fold-out page) Use 251 EP grease or similar multi-
purpose lithium grease, no. 2. Operator
!