MT Logic LE-227794MT, Инструкция по эксплуатации

Страница: 70 / 124

B) Connect to external AV devices using Composite
1. Left & Right Audio input.
2. CVBS / compositeand Component
video input.
4. DC12V power input
(C) Connect with TV signal
1. Antenna / 75Ω aerial input.
2. DC 12V power input.
E 7
4
2
3
1
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
COAX
YPbPr
CVBS
R
L
RF IN
CI
SLOT
2
1
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
COAX
YPbPr
CVBS
R
L
RF IN
CI
SLOT
3. YPBPR/component Input.
Connection steps
˖
* Read the user guide supplied with your AV devices and ensure that it has Composite
or S-Video connectors;
* Make sure that the power of the LED-TV and the AV device are off;
* Connect a Composite video cable (not supplied) to the yellow composite video
connector input on the back of the LED-TV. Now insert the other end of the composite
cable into the yellow composite connector output on the AV device;
* Connect a YPBPR Cable (not supplied, provide better image quality)
to the YPBPR connector on the back of the LED-TV. Now insert the other end of the
YPBPR cable into the YPBPR connector on the AV device;
* Connect the RCA audio cables (not supplied, white and red connectors) from the AV
devices’ RCA audio output connectors to the RCA audio input connectors on the back
of the LED-TV;
* Turn on the power of the LED-TV first, and then turn on the power of the AV device;
* Press the
INPUT button to set the video input mode of the LED-TV to “YPBPR”
mode or “AV” mode;