2.
2.
4.
5.
3.
3.
1.
Empty all water from system.
2.
Reattach Clean Side Cover to Universal Bottle Adapter.
3.
Fold up and clip Purge Valve to Purifier Cartridge.
4.
Air or towel dry all parts as much as possible, then
bundle hoses next to Purifier Cartridge.
(NOTE: All
parts [reservoir, hoses, cartridge, adapter] should
remain connected to avoid cross-contamination during
storage.)
5.
Roll Dirty Water Reservoir around Purifier Cartridge
and hoses and place in carry case. Always disinfect
the cartridge
BEFORE
long-term storage (15+
consecutive days. See Step 5).
2. PACK & STORE
GUARDIAN GRAVITY SYSTEM
DO NOT
disassemble and dry out the Purifier Cartridge before
storing it. If the cartridge’s internal fibers dry out, they will no longer pass water; the cartridge
must stay wet inside.
WARNING
Never store the Purifier Cartridge in cold temperatures (below 32 F/0 C).
If the cartridge freezes, the flow rate will drop significantly and fibers may be damaged.
WARNING
1.
Open Purge Valve to flush the Purifier Cartridge until
the water is the same color as the source water and free
of bubbles.
Each time the Purge Valve is opened, dirt and built-up
contaminants are flushed from the system. This cleans the
filter, maintains optimal water flow and extends the filter’s
life. Ensure the system is flushed ideally every 10 liters, or
every 3 liters for cloudy or tea-colored water.
3. FLUSHING (CLEANING)
PURIFIER CARTRIDGE
The Purge Valve releases concentrated dirty water. DO NOT allow any drops
to splash into your clean water. Cross-contamination can expose you to microorganisms and increases
your risk of gastrointestinal illness.
WARNING
