garden hose
6SD7XE&OHDQLQJ
If dirt is visible in the water or water becomes cloudy and proper water chemistry does not clear it up, change
the water and clean the spa tub.
$IWHUWKHVSDZDWHULVGUDLQHGUHPRYHWKHFDUWULGJHIURPWKHLQVLGHRIWKHVSDWXEZDOOFOHDQDQGRUUHSODFH
the filter cartridge. Use a sponge and mild soap solution to wipe away any soil or stains on the inside of the spa
wall. Rinse thoroughly before refilling with clean water.
IMPROTANT: Do not use steel wool, hard brushes or abrasive cleaners.
6SD7XEDQG$LU%ODGGHU2SWLRQDO5HSDLU
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
20
DRAINAGE, CLEANING AND STORAGE
Spa Drainage
1. Turn off all the buttons (heater, filter and bubble) on the wired controller.
2. Connect the drain valve adapter to a garden hose and point the other end of the garden hose to a suitable
draining area with local environmental regulations (Fig.1)
3. Remove the drain valve cap from the outside of the spa tub and attach the drain valve adapter with the
garden hose to the drain valve (Fig.2)
4. From the inside of the spa tub, open the drain valve cap, water will start to flow out through the garden hose
(Fig.3)
5. When the water stops draining, lift the spa tub wall from the opposite to the drain, leading any remaining
water to the drain and empty the spa water completely. (Fig.4)
6. Press Bubble button to dry out any water in the piping system. Operate the bubbling function for 15
minutes to blow out all the remaining water. (Fig.5)
7. Use a clean towel to wipe up any remaining water and moisture on the spa tub and the controller. (Fig.6)
1
17
2
3
4
5
6
BUBBLE
15
minutes
UP
DOWN
HEATER
BUBBLE
FILTER
TIMER
°C
