7
6056 Rev B
4.0
OPERATING INSTRUCTIONS
1.
Remove the
T°
HOLD
®
Heater Plate from its packaging.
2.
Check the Heater Plate to ensure that all of the packaging material is removed.
3.
Mount the Power Box to the I.V. pole support using the supplied C-Clamp.(Ref: Fig 4)
4.
Hang the Heater Plate from the I.V. pole hook. (Ref: Fig 5A and 5B).
FIGURE 4 - I.V. POLE MOUNTING 1
5.
After ensuring the power switch is “off” plug the power supply cord into an
approved hospital grade outlet.
6.
Place a 104°F pre-warmed bag from a Medical Solutions, Inc. fluid warmer (16N1
®
,
Temp 1
®
, Temp 2
®
, Temp 3
®
, Heat Stack
®
) without the sterile over-wrap on the upper
or lower hook so that the bag’s ports are accessible below the Heater Plate.
Figure 5A
Figure 5B
FIGURE 5 - HOOK SWIVEL AND BAG MOUNTING 1
C – Clamp
Hook Swivel – Rotate Bag
For User
View Preference
Lower Hook
(Shorter Bag)
Upper Hook
(Longer Bag)
Not available
On certain
models
