MSI MSI-8000, Руководство оператора

Страница: 31 / 44

1) With the MSI-8000 on, press the
F1 key and the F3 keys
simultaneously.
2) The LCD shows “Print”. Press
F1 .
3) The sub-menu item “StrnG”
(String) appears. Press F1
.
4) The current Print Mode format
number is displayed.
5) Setup a print format with one or
more digits representing the data
type required for the print output.
In this example, we’ll set the Print format
for a Net, Gross, Tare output with a
carriage return/line feed between each
print output. The number entry required
will be 2349. The 2 is for Net weight,
the 3 for Gross weight, the 4 for Tare
weight, and the 9 inserts a space before
the next print output.
6) Using the F2 Key, scroll through
the digits until the desired digit
is shown, then press
F1 to enter
the digit value. Repeat for the
remaining digits.
7) When the entire number is
displayed press F1 . The next
item in the Print menu appears,
“Cntrl”.
8) Press F1 to enter the Print
Control Menu. The last set control
mode will appear.
9) To change the print control mode,
press F2 .
In this example, we’ll set the Print Control
Mode to Continuous.
10) Press F2 key until the desired
print control mode is shown.
11) When the desired print mode is
shown, push F1 to save. The
next Print setup item, “rAte”
appears. If you have set
Continuous (Cont) as your print
control, proceed to step 12). For
any other Control mode jump to
step 15
Printer / Output Setup
blinking
blinking
fixed
fixed
fixed
&QWUO
ENTER/SELECT
ENTER/SELECT
ENTER/SELECT
Next Print Menu Item
3ULQW
6WUQ
ENTER/SELECT
ENTER/SELECT
blinking
SCROLL
SCROLL
ENTER/SELECT
ENTER/SELECT
fixed
blinking
SCROLL
SCROLL
Example Value
blinking
SCROLL
blinking
ENTER/SELECT
2))
SCROLL
2))
SCROLL
8V(U
Function Key Prints Print is disabled
SCROLL
/R$G
SCROLL
&RQW
Function Key Prints Print is disabled
UDWH
Next Print Menu Item
ENTER/SELECT
1= Current Wt
(Wt-Unit-Mode )
2= Net Wt
(Wt-Unit-Net )
3= Gross Wt
(Wt-Unit-Grs )
4= Tare Wt
(Wt-Unit-Tare )
5= Total Wt
(Wt-Unit-Total )
6= Total Count
(#Samples-TCNT )
7= Current Wt
(no units or mode )
8=
(Reserved)
9= CR-LF ( )
Press Simultaneously
0
F1
F2
Exit and Cancel Changes
Exit and Save/Back 1 Level
Enter / Select
Scroll
In Menu Key Functions
COMM Set Up 27
Figure 5-7. Printer/Output Set Up