background image

1-4

Overvew  

Touch Panel PC   

Overvew  

Touch Panel PC   

11

RJ45 LAN Jack 

The  standard  RJ-45  LAN  jack  is  provided  for  connection  to  the  Local  Area 

Network (LAN). You can connect a network cable to it.

Yellow

Green/ Orange

LED

Color

LED State

Condton

Left

Yellow

Off

LAN lnk s not establshed.

On (steady state)

LAN lnk s establshed.

On (blnkng)

The computer s communcatng wth an-

other computer on the LAN.

Rght

Green

Off

10 Mbt/sec data rate s selected.

On

100 Mbt/sec data rate s selected.

Orange

On

1000 Mbt/sec data rate s selected.

12

USB 2.0 Port 

The  USB  (Universal  Serial  Bus)  port  is  for  attaching  USB  devices  such  as 

keyboard, mouse, or other USB-compatible devices. It supports up to 480Mbit/s 

(Hi-Speed) data transfer rate.

13

Audio Jack

Lne-In (Blue) - for external CD player or other audo devces
Lne-Out (Green) - for speakers or headphones
Mc-In (Pnk) - for mcrophones

14

System Power LED (Green)

The power LED glows when the system is turned on and goes off when the 

system is shut down. 

15

Hard Disk Drive LED (Red)

This indicator shows the activity status of the HDD. It flashes when the system is 

accessing data on the HDD and remains off when no disk activity is detected. 

16

System Power Button

Press the system power button to turn the system on or off. 

17

AT/ATX Switch

Use this switch to select between AT and ATX power modes. 

18

RS-232 Serial Port: COM5

The serial port is a 16550A high speed communications port that sends/receives 

16 bytes FIFOs. It supports barcode scanners, barcode printers, bill printers, 

credit card machine, etc.

Содержание MS-9A61

















































Отзывы: