MSI MS-1057, Руководство пользователя

Страница: 219 / 338

S S
T TA AN ND DA AR RD DS S
89
Français
English
Deuts
ch
Standards
Electromagnetic Compatibility
• When connecting additional components, please observe the
Guidelines on Electromagnetic Compatibility (EMC).
Please note that only shielded cables shorter than
3 meters (9.84 ft) should be used for the LPT, COM, USB,
IEEE 1394, audio, video and network interfaces with this
notebook.
• Keep the notebook at least one meter (approximately three
feet) away from
high frequency and magnetic interfer-
ence sources (e.g., televisions, loudspeaker cabinets, mo-
bile telephones, etc.) in order to avoid malfunctions and/or
loss of data.
ISO 13406-2 Class II
Active matrix LCDs (TFT) with a resolution of 1280 x 800 pixel
( WXGA ), which are in turn composed of three sub-pixels each
(red, green, blue), contain about 3.1 million addressable transis-
tors. Because of this very high number of transistors and their
extremely complex production process occasionally defective or
incorrectly addressed pixels or sub-pixels may occur.
There have been several attempts in the past to define the ac-
ceptable number of defective pixels. But this can be difficult and
varies widely between different manufacturers.
We, therefore, adhere to the clear and strict requirements of
ISO
13406-2, class II , for the warranty handling of all TFT display
products. These requirements are summarized below.
Within ISO-standard 13406-2 the general requirements regarding
pixel defects are defined. Pixel defects are classified into three
failure types and four failure classes. Each individual pixel is made
up of three sub-pixels in the primary colours (red, green, blue).