3-17
BIOS Setup
Clear System Event Log
Enabling this selection will force the BIOS to clear the System Event Log on the
next boot. Options: [Disabled], [Enabled].
Existing Event Log number
It shows the number of existing event log.
SYS Firmware Progress
Enabling this selection will log POST Progress. Options: [Enabled], [Disabled].
BIOS POST Watchdog
Enabling this selection will enable POST watchdog. Options: [Enabled], [Disabled].
System Event Log
Press <Enter> to display the System Event Log.
Hardware Monitor (Optional)
This setup screen monitors the status of your CPU, fan, overall system status,.. etc
and
will NOT show up when the mBMC chip (for Server Management) is
integrated on the mainboard
. Monitor function is available only if there is hard-
ware monitoring mechanism onboard.
SEL Entry Number = 1
SEL Record ID = 0010
SEL Record Type = 02 - System Event Record
Timestamp = 07.29.2003 10:50:08
Generator Id = 20 00
SEL Message Rev = 04
Sensor Type = 01 - Temperature
--
Sensor Number = 32 - TMP_S2
SEL Event Type = 81 - Upper Non-critical Going
SEL Event Data = 57 24 2A
PhoenixBIOS Setup Utility
This is an entry in the
System Event Log
Item Specific Help
Advanced
System Event Log
F1 Help
F1 Help
F1 Help
F1 Help
F1 Help
↑↓
Select Item -/+ Change Values
Select Item -/+ Change Values
Select Item -/+ Change Values
Select Item -/+ Change Values
Select Item -/+ Change Values
F9 Setup Defaults
F9 Setup Defaults
F9 Setup Defaults
F9 Setup Defaults
F9 Setup Defaults
Esc Exit
Esc Exit
Esc Exit
Esc Exit
Esc Exit
↔
Select Menu Select
Select Menu Select
Select Menu Select
Select Menu Select
Select Menu Select
Sub-Menu
Sub-Menu
Sub-Menu
Sub-Menu
Sub-Menu
F10 Save and Exit
F10 Save and Exit
F10 Save and Exit
F10 Save and Exit
F10 Save and Exit
F1 Help
↑↓
Select Item
-/+ Change Values F9 Setup Defaults
Esc Exit
↔
Select Menu
Enter Select Sub-Menu F10 Save and Exit
8
