background image

3-4

MS-9161 SSI Server Board

Once you enter 

PhoenixBIOS Setup Utility

, the Main Menu will appear on the

screen. On the Main Menu screen, you will see basic BIOS settings including system
time & date, and the setup categories the BIOS supplies. Use Arrow keys to move
among the items and menus, and make changes to the settings.

Main Menu

Use this menu for basic system configurations, such as time, date etc.

Advanced Menu

Use this menu to set up the items of special enhanced features available on your
system’s chipset.

Security Menu

Use this menu to set Supervisor and User Passwords and the Backup and Virus-
Check reminders.

Power Menu

Use this menu to specify your settings for power management.

Boot Menu

Use this menu to specify the priority of boot devices.

Exit Menu

This menu allows you to load the BIOS default values or factory default settings into
the BIOS and exit the BIOS setup utility with or without changes.

The Menu Bar

System Time

[09:10:11]

System Date

[05/25/2003]

Legacy Diskette A:/B:

[1.2MB 5¼ ]

8

Primary Master

     [None]

8

Primary Slave

     [None]

8

Secondary Master

      [CD-ROM]

8

Secondary Slave

     [None]

Large Disk Access Mode  :

[DOS]

Boot Summary Screen :

[Disabled]

System Memory  :

624KB

Extended Memory

:

510MB

PhoenixBIOS Setup Utility

    

    

    

    

    

 

 

 

 

 

 

 

 

 

 

Main     

     Advanced          Security          Power          Boot          Exit

<Tab>, <Shift+Tab>, or
<Enter> selects field.

Item Specific Help

 

F1   Help  

      

      

      

      

      

 ↑↓  

Select Item 

     

     

     

     

     

 -/+  Change Values    F9  Setup Defaults

 

 

 

 

 

Esc  Exit

   

   

   

   

   

  ↔ 

Select Menu

    

    

    

    

    

Enter Select   Sub-Menu   F10  Save and Exit

8

Содержание K8D Master3-133 FA4R


































































Отзывы: