3-7
BIOS Setup
Items in the menu are divided into 7 sub-menus. Each sub-menu provides more
settings. To enter the sub-menu, highligh the sub-menu you want to configure and
press <Enter>.
The Advanced Menu
Installed O/S
Select the operating system installed on your system which you will use most
commonly. Options: [Other], [Win95], [Win98], [WinMe], [Win2000].
Reset Configuration Data
Select Yes if you want to clear the Extended System configuration Data (ESCD) area.
Options: [Yes], [No].
USB Host Controller
This setting is used to enable/disable the onboard USB controller. Setting options:
[Enabled], [Disabled].
USB BIOS Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse. Setting options: [Enabled], [Disabled].
F1 Help
F1 Help
F1 Help
F1 Help
F1 Help
↑↓
Select Item -/+ Change Values
F9 Setup Defaults
Esc Exit
Esc Exit
Esc Exit
Esc Exit
Esc Exit
↔
Select Menu Select Sub-Menu F10 Save
and Exit
Installed O/S :
[Other]
Reset Configuration Data :
[No]
USB Host Controller :
[Enabled]
USB BIOS Legacy Support :
[Enabled]
Multiprocessor Specification :
[1.4]
QuickBoot Mode :
[Enabled]
Case Open Function :
[Reset]
8
Chipset Configuration
8
Keyboard Configuration
8
I/O Device Configuration
8
PCI Configuration
8
Console Redirection
8
POST Error Log
8
IPMI (or
8
Hardware Monitor)
PhoenixBIOS Setup Utility
Select the operating sys-
tem installed on your sys-
tem which you will use
most commonly.
Note: An incorrect setting
can cause some operating
systems to display unex-
pected behavior.
Item Specific Help
Main
Advanced
Security Power Boot Exit
F1 Help
↑↓
Select Item
-/+ Change Values F9 Setup Defaults
Esc Exit
↔
Select Menu
Enter Select Sub-Menu F10 Save and Exit
8
