MSI 5000P Master2 Series, Руководство пользователя

Страница: 67 / 73

A-17
Intel SATA RAID
(1) Step 1: Configure Volume
Here you can configure the new RAID volume by entering the volume name, selecting
the RAID level and strip size.
†
RAID Volume Name:
A desired RAID volume name needs to be typed in where the
‘
RAID_Volume1
’
text
currently appears above. The RAID volume name has a maximum limit of 16 characters.
The RAID volume name must also be in English alphanumeric ASCII characters.
†
RAID Level:
Select the desired RAID level:
RAID 0 (Performance)
–
A volume optimized for performance will allow you to
access your data more quickly.
RAID 1 (Redundancy)
–
A volume optimized for data redundancy will provide
you with a realtime duplicate copy of your data. Note:
Only half of the available volume space will be avail-
able for data storage.
RAID 5 (Useful)
–
RAID 5 can be used on three or more disks, with zero
or more spare-disks. The resulting RAID-5 device size
will be (N-1)*S, where N is the how many drive, S is the
size of the smallest drive in the array. If one of the disks
fail, all data are still intact. It can rebuild the disk from
the parity information. If spare disks are available, re-
construction will begin immediately after the device
failure. If two disks fail simultaneously, all data are lost.
RAID-5 can survive one disk failure, but not two or
more. Both read and wri te perf ormanc e us ually
increase, but can be hard to predict how much. Reads
are similar to RAID-0 reads, writes can be either rather
9188v1.0-Appendix A(Intel SATA RAID).p65 2007/4/10, 下午 02:41 17