10
2
、
Use the hexagon key to tighten the set screw
②
.
3
、
Insert the plug
④
on the lamp chamber into the
socket of microscope
⑤
.
3-2Install the objective nosepiece
1
、
Turn the coarse focusing knob to lower the
stage.
2
、
Slightly loosen the fixing screw
①
of the
objective turntable.
3
、
Do not screw the fixing screw
①
too loose,
otherwise it is difficult to replace the objective nosepiece.
3
、
Hold the objective lens nosepiece, keep the dovetail mounting port
②
horizontal,
insert it into the dovetail
③
on the microscope arm, and gently push it into the end.
4
、
Tighten the fixing screw of objective lens turntable
①
.
When installing or removing the objective nosepiece with cable, the cable
must be removed in advance.
3-3 Installing cables
Pass the cable
④
under the microscope body
arm to the rear panel, let the cable pass through
the cable rack, and then plug the cable into the
socket on the rear panel.
