9
Adjust the height of the stage
1、Lower the stage to the lowest level, and then remove the stage from the microscope.
2、Using a hexagon screw driver, loosen the fixed screw ① of the stage bracket to remove
the stage bracket.
3、Turn the coarse focus knob to raise the focus
slide plate ③ to the place where the limit screw
can be seen from the mirror arm
4、Use a hexagon screw driver to loosen and remove
the upper limit screw ②.
Re-install the stage bracket and stage
Please keep the removed screws properly
for reuse.
Use oil mirror
1、Focus the sample in the order from low
magnification objective to high magnification
objective
2、Before using the oil lens, place a drop of oil
on the area to be observed of the sample.
3、Turn the objective nosepiece into the optical
path and adjust the fine focus button.
Bubbles in the oil will affect the observation,
please make sure there are no bubbles in the oil
Ⅲ
、
Installation steps
3-1 Install LED light room
1
、
1. Align the fixing screw
②
with the screw
hole
②
, and install the LED lamp chamber
①
into the mounting hole at the back of the
microscope.
