MSG Equipment MS015, Руководство пользователя

Страница: 14 / 58

English
Tester MS015
14
7. TROUBLESHOOTING GUIDE
Below you will find the table with the possible problems and the solutions on their elimination.
Problem Causes Solutions
1. You cannot switch
on the tester, or the
measured parameters
are displayed wrong.
Bad connection between the
diagnostic cable and the
tester connector.
Check the connection density.
The diagnostic cable is
damaged.
Check the integrity of the
diagnostic cable. If required,
replace the diagnostic cable.
2. The touchscreen
doesn’t respond to the
touches of the
operator.
The touchscreen is damaged. Contact the dealer.
3. The diagnostics
mode cannot start.
Contact the dealer. Contact the dealer.
8. RECYCLING
For the recycling of the bench, refer to the European Directive 2202/96/EC (WEEE Directive - the
directive on waste electrical and electronic equipment).
The outdated electronic testers and electrical appliances, including the cables, hardware,
batteries and storage batteries shall be disposed separately from the house waste.
To dispose the waste products, exploit the available returning and collecting systems.
The appropriate disposal of the outdated testers helps to prevent harming to environment and
health.