MSE MicroCentaur Plus Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 24

MSE MicroCentaur Plus Скачать руководство пользователя страница 22

IMPORTANT!

Please carry out a safety test for earth bonding, insulation and earth leakage

before completing the service.

7.5 Repairing your centrifuge

Your Micro Centaur Plus should provide you with years of trouble-free centrifugation. However,
there are occasions when, for various reasons, you centrifuge may need to be repaired.
Warranty repairs will be carried out by authorised service personnel or in an authorised service
work shop designated by MSE Centrifuges Ltd.

The user will be responsible for the disinfection and decontamination of the unit prior to any
service engineer visit or if unit is to be sent back to an MSE Centrifuges Ltd authorised work
shop.

The centrifuge will only be accepted if the disinfection / de-contamination certificate is forwarded
to the repair shop and a copy of the certificate accompanies the Centrifuge.

Information about authorised service workshops can be obtained from the Manufacturer.

8. HOW TO OBTAIN SERVICE ON YOUR MICRO CENTAUR PLUS

8.1 Warranty

The Micro Centaur Plus comes with a 2-year warranty from the date of purchase. After the 2
years, an annual service of the centrifuge is recommended. This should be only be carried out
by an authorised MSE service engineer. The service life of the centrifuge is approximately 10
years.

Should your centrifuge require a service at any time, please contact us at:

MSE Centrifuges Ltd

Mytogen House
11 Browning Road
Heathfield
TN21 8DB
United Kingdom

Tel: +44 (0) 1435 517000
Fax: +44 (0) 1825 700471

E-mail:

sales@msecentrifuges.com

www.msecentrifuges.com

If you are located outside the UK, please contact your local distributor. If you do not know who
your local distributor is, please contact our sales team via the details above.

«
...
20
21
22
23
24
»

Содержание MicroCentaur Plus

























Отзывы:

Нет отзывов