Users can switch between displaying the speed and RCF during the run by pressing the SPEED
RCF key twice (see Figure 1.5)
Figure 1.5
Note: The operator cannot change the parameters once the centrifuge is in motion.
5.5 Switching the centrifuge on
Having familiarized your self with the instruction manual, you can set the programmers that you
require load the rotor, shut the lid and press the START key.
5.6 Switching the centrifuge off
The centrifuge will automatically stop when the programme is completed. It is possible to stop
the machine before the programme is completed by pressing the stop key.
When you have completed your requirements, please remember to switch the machine off at
the mains switch located on the side of the centrifuge.
RC:14573
(1)
T = 99m00s
1 S
.
The “
=
” sign indicates
that the parameter can
be changed.
