MSC EAX-965Q Скачать руководство пользователя страница 68

Страница: 68 / 81

EAX-965Q

IDE HDD Block Model

If your IDE hard drive supports block mode select Enabled for automatic detection of the

optimal number of block read/writes per sector the drive can support.

IDE DMA Transfer Access

Use this field to enable or disable IDE DMA transfer access.

On-Chip Secondary PCI IDE

IDE Primary/Secondary Master/Slave PIO/UDMA Mode (Auto). The channel has both a

master and a slave, making four IDE devices possible. Because two IDE devices may have

a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. The

default setting “Auto” will allow auto detection to ensure optimal performance.

SATA Mode

Choose the interface of SATA controller. The default setting is “IDE” which let SATA like

parallel ATA controller. The “RAID” setting let SATA controller to support RAID.

The Advanced Host Controller Interface (AHCI) is a hardware mechanism that allows

software to communicate with SATA devices, such as hot-plugging and Native Command

Queuing (NCQ).

LEGACY Mode Support

The choices: Disabled, Enabled.

2.2.4.2 Super I/O Device

Power ON Function

This feature allows you to wake up the system using any of the listed options. The

selections are “Hot KEY”, “Mouse Left”, “Mouse Right”, “Any KEY” and “BUTTON ONLY”.

Hot Key Power ON

Awaken the system by pressing the hot key button. The choices are “Ctrl-F1”, “Ctrl-F2”,

“Ctrl-F3” to “Ctrl-F8”.

Содержание EAX-965Q


















































































Результаты поиска

Содержание EAX-965Q

Отзывы:

Похожие инструкции для EAX-965Q

Бренды по названию

Популярные бренды

MSC EAX-965Q, Руководство пользователя

Результаты поиска

Содержание EAX-965Q

Отзывы:

Похожие инструкции для EAX-965Q

Бренды по названию

Популярные бренды