MSC EAX-965Q Скачать руководство пользователя страница 46

Страница: 46 / 81

EAX-965Q

1.8.2.11 System Panel Connector (F_PANEL)

This connector supports several chassis-mounted functions.

System Power LED (2-pin PWRLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED

cable to this connector. The system power LED lights up when you turn on the system

power, and blinks when the system is in sleep mode.

ATX Power Button/Soft-off Button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button turns the

system on or puts the system in sleep or soft-off mode depending on the BIOS

settings. Pressing the power switch for more than four seconds while the system is ON

turns the system OFF.

Hard Disk Drive Activity LED (2-pin HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The IDE LED lights up or flashes when data is read from or written to

the HDD.

Reset Button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without

turning off the system power.

Содержание EAX-965Q


















































































Результаты поиска

Содержание EAX-965Q

Отзывы:

Похожие инструкции для EAX-965Q

Бренды по названию

Популярные бренды

MSC EAX-965Q, Руководство пользователя

Результаты поиска

Содержание EAX-965Q

Отзывы:

Похожие инструкции для EAX-965Q

Бренды по названию

Популярные бренды