MSA XTIRPA, Инструкция и руководство по безопасности

Страница: 18 / 55

Use
18
MSA/XTIRPA™ Adapter Base System 24" Reach
US US
(7.) If a material positioning winch is required while using davit arm
IN-2210 and mast IN-2003, use the bottom mounting bracket located
under the davit arm. Install the winch to the mounting bracket (A)
and lock with the pin attached to the winch (B). Remove the small
pulley locking pin (C). Position the cable over the pulley and re-
install using the locking pin (D).
Fig. 22 Step 7A Fig. 23 Step 7B
Fig. 24 Step 7C Fig. 25 Step 7D
Visit: www.thesafetyequipmentstore.com Or Email: besafe@thesafetyequipmentstore.com for Sales & Service.