Mounting Your Gas Monitor
Generally, the unit or the remote sensing module should be
mounted close to the area where a leak is likely to occur or
where the gas is expected. The Toxgard II Monitor or Remote
Sensing Module should be installed at a high level (ceiling),
breathing level or low level (floor), depending on the density of
the gas being monitored. Mount the unit so that the front display
is not blocked or hidden from view.
"
WARNING
Do not locate the Toxgard II Monitor in an area which may contain
a flammable mixture of gas and air; otherwise, an explosion may
occur.
The general-purpose Toxgard II Monitor can be a source of ignition
and must not be mounted in an area where a flammable mixture of
combustible gas and air may be present; otherwise, an explosion
may occur.
Figure 1-4.
Options and Accessories (Battery Back-up not shown)
Chapter 1, Set-up
1-4