SavOx TR / SavOx Industry TR
17
Maintenance and Service
GB
4.5
Assembly
Closing clamp
(1)
Place components into position and close clamp.
Observe proper position of neck strap.
Connecting breathing tube and connecting piece
(2)
Perform a tightness test according to chapter 4.4.
(3)
Locate starter pin in breathing tube and locate in
hole on connecting piece.
(4)
Fit connecting piece into breathing tube.
Connecting canister and breathing tube
(5)
Screw connecting piece with breathing tube into
canister.
Align breathing tube so that mouthpiece will be
towards body when device is donned.
Positioning breathing bag
(6)
Lay breathing bag on bench with exhalation valve
facing upwards.
(7)
Adjust neck strap to the maximum length.
