MSA Rail Slider™ Anchorage Connector
14
Care, Maintenance and Storage
US
3.5
Moving around the Work Area
WARNING!
DO NOT exceed the allowable free fall distance as specified by governing standards or subsystem
components.
DO NOT exceed the maximum fall arrest forces as specified by governing standards or subsystem
components.
Failure to follow these warnings can result in serious personal injury or death.
The MSA Rail Slider Anchorage Connector is designed to move along the rail anchorage, following the
user movements. Move around carefully to prevent loss of balance in the event the MSA Rail Slider
Anchorage Connector binds or contacts an obstacle in the path of movement.
4
Care, Maintenance and Storage
4.1
Cleaning Instructions
Use a clean damp (not wet) cloth to remove dirt or contamination which may cause corrosion or
hamper readability of labels. Wipe off any moisture before returning the device to service. The
frequency of cleaning should be determined by inspection and by severity of the environment. In highly
corrosive environments cleaning should be done every two or three days. Never use solvents to clean
the device as they may damage the labels. Don’t use abrasives to scour the device as they may
damage the surface and the labels. To remove oil or grease, use a mild dishwater detergent on a damp
cloth or sponge and follow by repeated swabbing with a clean cloth to remove all soap residue. Never
immerse the product in water or other liquid.
4.2
Storage
Store the device in a clean, dry place indoors. Store the product away from heat and steam and never
allow it to rest for lengthy periods of time on concrete or ash floors as the lime sulfur and ash can cause
corrosion.
4.3
Maintenance and Service
User maintenance consists of cleaning and drying the device. All other maintenance or repair/work
must be done at the factory or by an authorized person. (Authorization by MSA must be written.)
