«NPK Morsvyazavtomatica» LLC
Operating manual
Page 12
3
TECHNICAL SERVICE
3.1
G
ENERAL DESCRIPTION
The TS
shall be provided by the staff acquainted with its composition, structure
and operation features.
In order to provide safe and reliable operation for the Product, the staff shall main-
tain technical service № 1 (hereinafter – TS-1) – semi-annual TS;
TS-1 shall be provided by the staff on the running equipment.
3.2
S
AFETY FEATURES
While maintaining the TS, observe 4.2.
3.3
M
AINTENANCE ROUTINE
The list of works for all types of TS is given in table 6. Maintenance routine pro-
cedure is given in checklists, represented in tables 7, 8.
Table 6 – List of works by TS types
CL №
Work
Type of TS
TS-1
1
Visual check of the Product
+
2
Test for the Product operability
+
Note: “+” – work is obligatory.
Table 7 – Checklist № 1. Visual check of the Product
To be done
Routine
Man-hours per 1
Product
Visually examine
the Product
1 check completeness and appearance of the Product;
mechanical damage, paint defects must be absent; mark-
ing plates shall be present; legends are to be read easily.
2 clean up the Product surfaces with clean cloth;
3 remove severe contamination, parts of corrosion, oil
spots from the metal surfaces – using ethyl alcohol,
avoiding its penetration inside the Product; all surfaces
clean dry by clean cloth and dry up;
4 If varnish paint coating is damaged, polish it with sand
paper, then clean with alcohol-soaked cloth, cover with
varnish АК-113 and dry up.
1 person
5 mins
Check reliability
of cable and bus
connection to the
Product
1 check that connectors and attaching screws are fas-
tened tight; provide further fastening if needed.
2 check the cable integrity (mechanical damage shall
be absent) within visibility
1 person
5 mins