Configuring the Gateway
EZ Gateway Start-up Guide
21
Enabling BBMD and Editing the Broadcast Distribution Table
Parameter
Definition
BACnet/IP BBMD Settings
Enable BBMD
Select this checkbox to enable the Router to act as a BBMD.
Public IP Address
If the BBMD is being accessed across a NAT Router, then these values must be
configured with the public IP address and Port by which the BBMD can be reached from
across the NAT Router. The Public IP Address and Port would also be used in the
Broadcast Distribution Table (BDT) of remote BBMD's that need to reach this BBMD
across the NAT Router (see
). If no NAT Router is being used, these fields can
be left blank.
Public IP Port
This MUST be different to the IP Port used on the BACnet/IP Primary connection.
Default is 47809 (0xBAC1).
Figure 19: Connection Parameters
– BBMD
Figure 20: Edit Broadcast Distribution Table Window
