manualshive.com logo in svg

MSA 10193956, Руководство по эксплуатации

Поделиться
Скачать
MSA 10193956 Скачать руководство пользователя страница 22

22

Preparing for Use

G1 Powered Air-Purifying Respirator (PAPR)

US

6.4

Installing the Breathing Tube on the Blower Assembly

6.5

Installing the Breathing Tube in the Facepiece and APR Adapter

WARNING!

Make sure that there is no debris on the breathing tube handwheel. Make sure that the handwheel 
can turn easily. If the handwheel cannot turn easily and the breathing tube is moved during use, the 
facepiece seal can leak.
Failure to obey this warning can result in serious injury or death.

(2) Pull on the APR adapter to make sure that it is 

attached tightly to the facepiece.

(1) Remove the green protective plug from the inlet port 

of the breathing tube.

Keep the protective plug to use during storage.

(2) Examine the gray gasket in the inlet port of the 

breathing tube. If the gasket is damaged or missing, 
replace it (PN B-10022-001).

(3) Install the inlet port of the breathing tube in the outlet 

port of the blower assembly, and hand-tighten the 
connection.

(1) Remove the green protective plug from the inlet port 

of the breathing tube.

Keep the protective plug to use during storage.

(2) Install the APR adapter in the outlet port of the 

breathing tube.

(3) Use the breathing tube handwheel to hand-tighten the 

connection.

Содержание 10193956





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды