ID20
Industrial Door Microwave Motion Sensor
INSTALLATION INSTRUCTIONS
Page 2
(/MANU) ID20v0913
Section 3
System Inspection and Instructions
*****EXTREMELY IMPORTANT*****
After final set-up, test unit(s) completely to ensure that
proper coverage has been achieved (width, depth and
location of the pattern must be tested).
After the installation and operational check of the
system:
1. Place the proper warning labels on the door.
2. Instruct the owner of the door system operation and
how to test it. This should be checked on a daily
basis.
3. Instruct the owner on what to do if the door or any of
its components become damaged.
4. Strongly recommend to the owner that the complete
entry be inspected twice a year as part of the service
agreement.
TYPICAL PATTERN DIAGRAM
Mounting Height: 12 Ft.
Tip Angle: 16°
Section 4
Technical Data
Model................................ ID20
Frequency.......................... 10.525 GHz
Detection Pattern............. Adjustable Range (see typical
pattern diagram)
Detection Angle................ Adjustable, Horizontal &
Vertical
Detection Mode................ Unidirectional (approach only
or depart only)
Response Time................. 0.150 seconds
Hold Time.......................... 0 to 5 seconds
Power Requirements........ 12 to 24V AC or DC
Current Consumption....... 0.075 Amp @ 24V DC
Relay Contacts.................. Form C, rated at 3 Amps
Mounting........................... Heavy-duty bracket, predrilled &
slotted
Temperature..................... -35°F to 165°F
(-35°C to 74°C)
Weight............................... 3.5 lbs. (1.6 kg)
Size.................................... 7" x 4" x 4"
17.8cm x 10.2cm x 10.2cm
Color/Enclosure................ Aluminum, black powder coat
finish
Section 5
Warranty
MS SEDCO guarantees this product to be free from manufacturing
defects for one year from date of installation. Unless MS SEDCO is
notified of the date of installation, the warranty will be in effect for
one year from the date of shipment from our factory. If, during the
first year, this device fails to operate and has not been tampered
with our abused, the unit can be returned prepaid to factory and it
will be repaired free of charge. After one year, the unit will be
repaired for a nominal service charge.
This limited warranty is in
lieu of all other warranties expressed or implied, including any
implied warranty of merchantability, and no representative or
person is authorized to assume for MS SEDCO any other liability
in connection with the sale of our products. All warranties are
limited to the duration of this written warranty. In no event shall
MS SEDCO be liable for any special, incidental, consequential or
other damages arising from any claimed breach of warranty as
to its products or services.
Range
Pattern - Horizontal and Vertical
ID20
16°
4'
7'
10'
12.5'
15.5'
18.5'
Widt
h
0'
10'
20'
30'
40'
50'
60'
8701 Castle Park Drive
Indianapolis, Indiana 46256
Telephone: (317) 842-2545
www.mssedco.com