MS Schippers 4508560, Руководство пользователя, Страница: 12 / 16

12
4. Place Reverse Osmose Filter in the Reverse Osmose holder
5. Place the Harsbed filter in the white holder on the back of the device
6. Connect the 10 mm hose (the thickest one) to the water supply.
INPUT
7. The 8 mm hose that comes from the UV-filter at the back of the device.
DEMI WATER
8. The 8 mm hose that comes from the top of the device =
WASTE WATER
9. Turn the power and water on.
10. When the pressure is high enough the device starts to produce
DEMI WATER . When the
pressure drops the device turns off automatically and will also start again when the pressure
reaches the required level.
After a double check if all filters are in place, the system can be plugged in and switched on
with the on / off switch.
As soon as the water pressure is high enough the device will come into action and will start
to purify water.
Note : The produced water is not suitable for human consumption!