MRMC Pan Bars, Быстрый старт, Страница: 15 / 24

Pan Bars Quick Start Guide
13
12. In the Flair window, right-click on one of the axes buttons along the
top of the screen, such as Pan , and in the pop-up menu choose Axis
Setup .
13. On the Control tab, specify which wheel you want to use to control
this axis, by setting the Controller to the mimic axis that you want
to use, for example Mimic 9 :
(The mimic axis numbers are the same ones listed earlier in the
Setups > Test Mimic Inputs pop-up.)
14. Specify the other Mimic Settings that you want to use for this
control (in the same section of the pop-up), then click on Save ,
Apply , and Exit .
15. In the Flair window, right-click on one of the axes buttons along the
top of the windows, such as Pan , and in the pop-up menu choose
Mimic Setup . You can also access this through the menu option
Mimic > Axis Mimic .
16. Specify Live for the axes that you have assigned the Pan Bars to, then
Apply . After you have tested the mimic operation you can use other
settings; see the Flair manual for details.
Moving the Pan Bars should now move the associated axis and change the
axis position numbers on the Flair screen. You can access the Axis Mimic
Setup dialog box again to assign the third and fourth mimic axis
whenever device is plugged into the
ZOOM
and
FOCUS
ports, such as a
Zoom controller and a FIZ pot.