MRMC Pan Bars, Быстрый старт, Страница: 10 / 24

Pan Bars Quick Start Guide
6
need to perform the steps given below. Refer to the manual that came
with your head for details.
1. Attach the cables to the Pan Bars, Ethernet Mimic box, Surface Pro
and head, as described in the previous section. Make sure the
relevant indicators light up; for example, the power indicator LEDs
on all 24Volt power supply bricks (
), and the power indicator
LED on the head ( ).
2. Focus control has to be physically set to zero before booting up the
PC. To do this, fully rotate the Focus knob anticlockwise on the
joystick to zero the focus axis.
3. Press the
POWER
button on Surface Pro.
4. Set up the head using MHC software installed on Surface Pro.
Turning off the system
Turn off Surface Pro by pressing the power button. Remove the power
cable to turn off the Ethernet Mimic box.
Note
It is a good idea to attach the power cables last, after all the
other cables are in place.
It is also recommended that you power up Surface Pro last,
after powering up the head, as powering up two devices
simultaneously on the same Ethernet network can cause
communication problems.