MRMC MRMC-1199-00A, Быстрый старт, Страница: 21 / 36

SFH-30 Quick Start Guide
17
Enter the new SN and GW addresses that you want to use and
click on
Save .
10. Close the Network Setup window by clicking on Exit .
11. If you want to use a controller other than a Flair PC then you are
now done with the PC:
11.1 Close Flair by choosing the File > Quit menu option.
11.2 Disconnect the Ethernet cable from the PC, and re-attach it to
the controller, so the head and controller are now connected.
11.3 Tell the controller which IP address to look for by following the
procedures in the documentation that came with your
controller.