MRMC MRMC-1199-00A, Быстрый старт, Страница: 14 / 36

SFH-30 Quick Start Guide
10
5. Set the limits.
In order to prevent damage to cables and other equipment, you can
set limits to the range of physical travel of the head movement and
lens controls.
For example to set the limits on an MSA-based controller (such as
the LFP, MSA-20 Handwheels, Joystick Controller, or Mini MSA)
you use the menu option
SET SOFT LIMITS
.
Subsequent sessions
After you have initially set up the system for your particular camera lens
and preferences, subsequent sessions take less time to set up, especially if
you have not disconnected control cables or moved sites. For subsequent
sessions at the same site you typically need to do the following at the start
of every session.
1. Attach the power cables to the head and controller.
2. Load the head.
3. Zero the axes.
If you have moved sites you will need to connect the control cables before
the power cables, and then set new limits after you have zeroed the axes.